JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC 12V

Wiring Connections:

• Red Wire: Connect to the positive terminal of the 12V DC power supply.
• Black Wire: Connect to the ground (negative terminal) of the power supply.

Power:

• Operating Voltage: 12V DC
• Current Draw: Approximately 0.47A under normal operation
• Power Consumption: 5.6W, ensuring that the solenoid operates efficiently without excessive power drain.

Input and Output:

• Input: Electrical input through the 12V DC power supply, activating the solenoid when current flows.
• Output: Mechanical linear motion, either pulling or pushing a load based on the solenoid’s configuration.

Physical Characteristics:

• Material: The solenoid is constructed from a durable metal casing with a moving iron core.
• Size: The solenoid is compact, typically measuring around 53mm in length, 30mm in width, and 15mm in height, allowing it to fit into small spaces.
• Weight: Lightweight design, usually around 100g, making it easy to mount without adding significant weight to the overall system.
• Plunger Diameter: Approximately 10mm, providing a stable and strong connection point for the load.

Technical Specifications:

• Operating Voltage: 12V DC, which is standard for many electronic and mechanical applications.
• Current: 0.47A, ensuring efficient operation without excessive heat generation.
• Force: 5N, providing sufficient power to move loads with precision.
• Stroke Length: 10mm, offering enough movement for various applications where linear motion is required.
• Response Time: Quick activation upon receiving power, making it suitable for applications requiring rapid response.
• Duty Cycle: Intermittent, meaning it is designed for applications where it is powered on and off rather than continuous use.
• Life Cycle: Designed for a long operational life, ensuring reliable performance over many cycles.

Additional Features:

• Versatility: The JF-0530B can be used in a wide range of applications, from door locks to industrial machinery, providing reliable linear motion where needed.
• Ease of Installation: With simple wiring connections and a compact design, this solenoid is easy to install and integrate into various systems.
• Wide Compatibility: Compatible with most 12V DC power sources, it can be used in automotive, industrial, and consumer electronics.
• Low Maintenance: The solenoid is designed to operate with minimal maintenance, offering consistent performance without frequent servicing.

How to Use:

• Connect the Power:
  • Red Wire to Positive: Connect the red wire of the solenoid to the positive terminal of a 12V DC power supply.
  • Black Wire to Ground: Connect the black wire to the ground or negative terminal of the power supply.
• Test the Solenoid:
  • Apply Power: When power is applied, the solenoid should activate, either pulling or pushing its plunger depending on its orientation.
  • Adjust the Load: Ensure that the load connected to the solenoid can move freely within the 10mm stroke range.
• Incorporate into Your System:
  • Mounting: Secure the solenoid in place using screws or mounting brackets, ensuring it is firmly attached and aligned with the load.
  • Integration: Integrate the solenoid into your system, whether it’s for an automatic door, locking mechanism, or other applications requiring linear motion.
• Control the Operation:
  • Use a Switch or Controller: To control the solenoid, you can use a simple switch, relay, or a microcontroller to apply or cut power as needed.
  • Monitor Performance: Regularly check the operation of the solenoid to ensure it functions correctly and without obstruction.

The JF-0530B pull-push type electric solenoid electromagnet is a versatile and reliable component for various applications requiring linear motion. With its compact size, quick response time, and durable construction, it is well-suited for use in everything from door locks to industrial machinery. Simple wiring and ease of integration make it a practical choice for both hobbyists and professionals.