GY-63 MS5611-01BA03 High Precision Pressure and Height Sensor Module

Specifications:

Model: MS5611-01BA03
Pressure Range: 10 to 1200 mbar
Resolution: 0.012 mbar (high precision)
Temperature Range: -40°C to +85°C
Power Supply: 1.8V to 3.6V
Interface: I2C (Inter-Integrated Circuit), SPI (Serial Peripheral Interface)
Dimensions: 13.2mm x 7.2mm x 2.4mm

Special Features:

High precision pressure sensor suitable for altitude measurements.
Low power consumption, making it ideal for battery-powered devices.
Supports both I2C and SPI communication, offering flexibility in integration.
Measures both pressure and temperature, allowing for accurate altitude readings.

Wiring Connections:

VCC: Connect to 3.3V or 5V power supply.
GND: Connect to ground.
SCL/SCK: Connect to I2C clock pin or SPI clock pin.
SDA/MOSI: Connect to I2C data pin or SPI data pin.
CSB: Connect to the chip select pin for SPI mode.
SDO/MISO: Connect to SPI data output pin.

Power:

Operating Voltage: 1.8V to 3.6V
Low power consumption, suitable for portable devices.

Original price was: ৳ 1,000.00.Current price is: ৳ 888.00.

Add to wishlist

Specification

Overview

Input and Output:

Input: Atmospheric pressure, temperature
Output: Digital data representing pressure and temperature (via I2C/SPI)

Physical Characteristics:

Small size, easily fits into compact designs.
Lightweight, making it ideal for drones and portable devices.

Technical Specifications:

Pressure Accuracy: ±1 mbar
Temperature Accuracy: ±2.0°C
Sampling Rate: Up to 2048 Hz
Operating Temperature: -40°C to +85°C

Additional Features:

Temperature compensation for accurate pressure readings across a wide temperature range.
Highly stable output with low noise, ensuring precise measurements.
Designed for easy integration into microcontroller-based systems.

How to Use:

Connect the Module:
- Connect VCC to the power supply (3.3V or 5V), GND to ground.
- Choose the communication mode (I2C or SPI) and connect the appropriate pins (SCL/SCK and SDA/MOSI for I2C, or SCK, MOSI, MISO, and CS for SPI).
Initialize the Sensor:
- Initialize the communication protocol in your microcontroller’s code.
- Read the calibration data from the sensor.
Read Data:
- Send commands to the sensor to start measurements.
- Read the pressure and temperature data from the sensor.
- Use the data to calculate altitude if needed.
Process Data:
- Apply necessary temperature compensation if required.
- Convert the raw data to human-readable units (e.g., mbar, °C).
Display or Log:
- Display the readings on a screen or log them for further analysis.

This module is widely used in applications where precise pressure and altitude measurements are required, such as in drones, weather balloons, and portable weather stations.