GPS Module NEO-6M Satellite Positioning Module for Arduino with Micro USB

Specifications:

Model: NEO-6M
Type: GPS Satellite Positioning Module
Interface: UART (Serial Communication) with Micro USB
Voltage: 3.3V to 5V DC
Current: Approximately 50mA

Special Features:

Provides accurate location data including latitude, longitude, and altitude.
Supports GPS navigation and timing.
Includes a built-in antenna for signal reception.

Wiring Connections:

VCC: Connect to the 5V pin on your Arduino for power.
GND: Connect to the ground (GND) pin on your Arduino.
TX: Connect to the RX (receive) pin on your Arduino for receiving GPS data.
RX: Connect to the TX (transmit) pin on your Arduino for sending data to the GPS module.
Micro USB: Used for powering the module and interfacing with a computer if needed.

Power:

Operating Voltage: 3.3V to 5V DC
Low power consumption, typically around 50mA during operation.

Original price was: ৳ 1,300.00.Current price is: ৳ 985.00.

Add to wishlist

Specification

Overview

Input and Output:

Input: GPS signals from satellites.
Output: Serial data stream providing GPS information such as latitude, longitude, altitude, and time.

Physical Characteristics:

Size: Approximately 25mm x 25mm
Weight: Lightweight and compact for easy integration into projects.
Includes a built-in antenna for satellite signal reception.

Technical Specifications:

GPS Frequency: 1.57542 GHz
Accuracy: Typically within 2.5 meters under ideal conditions.
Update Rate: Up to 10Hz (10 updates per second).

Additional Features:

Easy to interface with Arduino and other microcontrollers.
Includes a built-in antenna, simplifying setup.
Supports NMEA 0183 protocol for GPS data.

How to Use:

Connect the GPS module to your Arduino using the provided wiring connections.
Use the SoftwareSerial library in your Arduino code to read data from the GPS module.
Upload a sample sketch to your Arduino to begin receiving GPS data.
Parse the NMEA sentences provided by the GPS module to extract location information such as latitude, longitude, and altitude.
Use this data in your project for navigation, tracking, or timing purposes.

This GPS module is ideal for projects requiring precise location tracking and navigation. Its ease of use, built-in antenna, and compatibility with Arduino make it a popular choice for various applications in robotics, outdoor activities, and more.