Freenove ESP32-S3 WROOM Camera Board Arduino Compatible

Specifications:

Microcontroller: ESP32-S3-WROOM
Camera: OV2640
Operating Voltage: 3.3V
Flash Memory: 4MB
RAM: 512KB
Wireless: Wi-Fi (802.11 b/g/n), Bluetooth LE
Clock Speed: 240MHz
I/O Pins: 22 digital I/O pins, 4 ADC channels
Camera Resolution: Up to 2MP

Special Features:

Integrated Camera Module: Comes with an OV2640 camera for image capturing and streaming.
Dual-Core Processor: Provides robust performance with dual-core ESP32-S3.
Arduino Compatibility: Compatible with Arduino IDE for ease of programming.
Bluetooth and Wi-Fi: Offers versatile wireless communication options.
Built-in Flash: 4MB flash memory for storing firmware and data.

Wiring Connections:

3V3: Connect to a 3.3V power source or pin.
GND: Ground connection for circuit completion.
TX: Serial data transmission pin (connect to RX of external device).
RX: Serial data reception pin (connect to TX of external device).
IO Pins: General-purpose I/O pins for connecting sensors and actuators.
CAMERA: Pre-wired connection to the OV2640 camera module.
EN: Enable pin, typically connected to 3.3V to power on the module.
BOOT: Boot pin for entering bootloader mode (connect to GND to enter bootloader).
RST: Reset pin to restart the board.

Power:

Power Supply: Can be powered through USB (5V) or directly via the 3V3 pin.
Voltage Regulator: Onboard regulator provides 3.3V power to the ESP32 core.
Current Consumption: Depends on the activity, typically up to 500mA during operation.

Original price was: ৳ 3,680.00.Current price is: ৳ 3,445.00.

Add to wishlist

Specification

Overview

Input and Output:

Input: Captures image data from the OV2640 camera, digital inputs from sensors.
Output: Processes and sends image data over Wi-Fi or Bluetooth, controls connected devices.

Physical Characteristics:

Size: Approximately 60mm x 50mm.
Connector: USB Type-C or Micro-USB for connection to a PC.
Mounting: Designed to be used on a breadboard or mounted on a custom PCB.

Technical Specifications:

Temperature Range: Typically -40°C to +85°C.
Operating Voltage: 3.3V for the ESP32 core.
Communication Protocols: UART, SPI, I2C, PWM, ADC.

Additional Features:

OTA Updates: Supports over-the-air firmware updates for convenience.
Low Power Modes: Includes deep sleep and low-power operation modes to save energy.
Camera Integration: Built-in camera for various imaging applications.

How to Use:

Connect the board to your computer using a USB cable.
Install the necessary drivers for the USB-to-Serial chip if not already installed.
Open the Arduino IDE or compatible software.
Select the ESP32-S3 board and port in the Tools menu.
Install the ESP32 board library through the Board Manager in Arduino IDE.
Write or modify code for camera operations and Wi-Fi/Bluetooth communication.
Upload the code to the board by pressing the upload button.
Monitor the camera feed and data output using the Serial Monitor or a web interface.
Connect external sensors or actuators to the I/O pins as needed for your project.

The Freenove ESP32-S3 WROOM Camera Board is a versatile tool for developing camera-based applications and IoT projects, offering powerful features with easy integration into existing Arduino environments.