Espressif ESP32-C6 DevKitC-1-V1.2 N8

Wiring Connections:

• Power:
  • 5V: Connect to a 5V power source via USB Type-C.
  • GND: Connect to the ground of your power supply.
• Programming and Debugging:
  • TX: Connect to the RX pin of your programming tool for sending data.
  • RX: Connect to the TX pin of your programming tool for receiving data.
  • EN: Connect to the Enable pin to control the power state of the chip.
• Additional Pins:
  • GPIO Pins: General Purpose Input/Output pins for interfacing with other devices.
  • SDA/SCL: For I2C communication.
  • MOSI/MISO/SCK: For SPI communication.
  • PWM: For Pulse Width Modulation output.

Power:

• Operating Voltage: 5V provided through USB Type-C.
• Power Consumption: Depends on operation mode;  low during sleep mode and higher during active communication.
• Current Supply: Designed to handle currents necessary for both active and sleep modes.

Input and Output:

• Digital I/O: Multiple GPIO pins available for digital input and output.
• Analog Input: Analog-to-Digital Converter (ADC) pins for measuring analog signals.
• Communication Interfaces:
  • UART: For serial communication.
  • I2C: For connecting sensors and other I2C devices.
  • SPI: For high-speed data transfer with SPI devices.
• PWM Output: Used for controlling motors, LEDs, or other devices requiring precise timing.

Physical Characteristics:

• Dimensions: Compact board size, suitable for embedding in various projects.
• Mounting:  has mounting holes or pads for secure attachment to a PCB.
• Connector Type: USB Type-C connector for power and programming.

Technical Specifications:

• Processor: Single-core RISC-V 32-bit CPU.
• Flash Memory: 8 MB external flash for storing firmware and applications.
• Wi-Fi: Supports Wi-Fi 6 (802.11ax) with high speed and efficiency.
• Bluetooth: Bluetooth LE 5.2 for improved connectivity.
• Power Supply: 5V through USB Type-C.
• Operating Temperature:  ranges from -40°C to 85°C, suitable for industrial and consumer applications.

Additional Features:

• Security: Includes features like secure boot and hardware encryption for enhanced security.
• Flexible I/O: Numerous GPIO pins allow for flexible interfacing with other components.
• Low Power Modes: Supports various power-saving modes to extend battery life in portable applications.
• Development Tools: Compatible with popular development environments and tools like ESP-IDF, Arduino IDE, and PlatformIO.

How to Use:

1. Power Connection:
   • Connect Power: Plug the USB Type-C connector into a 5V USB power source.
2. Programming:
   • Set Up Environment: Install necessary drivers and development software (e.g., ESP-IDF or Arduino IDE).
   • Connect to PC: Use a USB Type-C cable to connect the board to your computer.
   • Upload Code: Write and upload your code using the development environment.
3. Wiring Setup:
   • Connect Peripherals: Wire any additional components to the GPIO, ADC, I2C, or SPI pins as needed.
   • Ensure Proper Connections: Verify all connections, ensuring that power and data lines are correctly connected.
4. Testing:
   • Power On: Ensure the board powers up correctly and check for any indicator lights or status messages.
   • Monitor Output: Use serial monitors or debugging tools to observe the board’s operation and data.
5. Integration:
   • Embed in Project: Integrate the board into your final application or prototype.
   • Verify Functionality: Test all features and interfaces to ensure proper operation within your application.

The ESP32-C6 DevKitC-1-V1.2 N8 offers a robust platform for developing Wi-Fi and Bluetooth applications with modern connectivity features and a powerful processor. Its versatility and support for multiple communication protocols make it suitable for a wide range of IoT and wireless projects.