DT-06 TTL to WiFi Module

Input and Output:

• Input:
  • Serial Data Input: Receives TTL serial data from a connected device.
  • Power Input: Requires a stable 3.3V or 5V DC power source.
• Output:
  • Serial Data Output: Sends TTL serial data over WiFi to connected devices.
  • WiFi Signal: Provides wireless communication capabilities.

Physical Characteristics:

• Dimensions: About 30 x 25 mm, compact for easy integration.
• Weight: Roughly 10 grams, lightweight for minimal impact on the project.
• Enclosure: Typically has a plastic or metal case for protection and durability.

Technical Specifications:

• WiFi Standard: 802.11b/g/n for standard wireless networking.
• Serial Communication Speed: Commonly supports baud rates from 9600 to 115200 bps.
• Operating Temperature: Usually operates between -10°C to +85°C, depending on the model.
• Antenna: May include an onboard or external antenna for WiFi signal transmission.

Additional Features:

• Configuration Software: Often comes with software or firmware for configuring network settings and other parameters.
• Firmware Upgrade: Capable of receiving firmware updates for improved performance and features.
• Error Handling: Includes mechanisms for handling communication errors and ensuring reliable data transfer.

How to Use:

1. Powering the Module:
   • Connect the VCC pin to a 3.3V or 5V power source, depending on the module’s requirements.
   • Connect the GND pin to the ground of the power source.
2. Connecting Serial Communication:
   • Connect the TX pin of the DT-06 module to the RX pin of the device you want to communicate with.
   • Connect the RX pin of the DT-06 module to the TX pin of the device you want to communicate with.
3. Configuring WiFi Settings:
   • Use the provided configuration software or serial commands to set up the WiFi network settings.
   • Connect the module to your WiFi network by entering the SSID and password.
4. Testing Communication:
   • Send data from the connected device to the DT-06 module and verify that it is transmitted over WiFi.
   • Check the data received on the other end to ensure proper communication.
5. Using GPIO Pins (if available):
   • Connect any additional GPIO pins to external devices or sensors as needed for your project.
   • Configure the GPIO pins using the module’s firmware or software.
6. Updating Firmware:
   • If necessary, use the provided firmware update tools to update the module’s firmware to the latest version.
   • Follow the manufacturer’s instructions for performing firmware updates.

The DT-06 TTL to WiFi module is a versatile and compact solution for adding wireless communication capabilities to TTL serial devices. It enables seamless integration into various projects, providing reliable and efficient wireless data transmission.