2.42-Inch OLED Screen LCD Display Module 128×64 SSD1309 SPI 7-Pin Yellow

Specifications:

Display Type: OLED (Organic Light Emitting Diode)
Screen Size: 2.42 inches (diagonal)
Resolution: 128×64 pixels
Driver IC: SSD1309
Interface: SPI (Serial Peripheral Interface)
Pin Count: 7 pins
Color: Yellow

Special Features::

High Contrast: Provides excellent visibility with bright yellow pixels against a dark background.
Low Power Consumption: Efficient in power usage compared to traditional LCDs.
Wide Viewing Angles: Clear visibility from various angles.
Fast Response Time: Suitable for applications that require quick display updates.

Wiring Connections:

VCC (Power Supply):
- . Connect to the positive voltage supply, 3.3V or 5V.
GND (Ground):
- . Connect to the ground of your power source.
SCK (Serial Clock):
- . Connect to the SPI clock pin on your microcontroller.
MOSI (Master Out Slave In):
- . Connect to the SPI data pin on your microcontroller.
RES (Reset):
- . Connect to a digital output pin on your microcontroller to handle resets.
DC (Data/Command):
- . Connect to a digital output pin on your microcontroller to switch between data and command modes.
CS (Chip Select):
- . Connect to a digital output pin on your microcontroller to select the display for communication.

Power:

Operating Voltage: 3.3V or 5V DC.
Current Consumption: Varies with display usage, generally low.

Original price was: ৳ 2,000.00.Current price is: ৳ 1,960.00.

Add to wishlist

Specification

Overview

Input and Output:

Input: SPI signals from the microcontroller, including clock, data, and control signals.
Output: Displays data and graphics on the OLED screen based on the input signals.

Physical Characteristics:

Dimensions: Approximately 64mm x 35mm x 3mm (sizes may vary slightly).
Weight: Lightweight, easy to integrate into various projects.
Material: Plastic housing with an OLED panel.

Technical Specifications:::

Pixel Size: 128×64 pixels.
Brightness: Yellow OLED pixels provide high brightness.
Contrast Ratio: High contrast due to OLED technology.
Viewing Angle: Wide, allowing clear visibility from different angles.
Operating Temperature: from -40°C to +85°C.
Storage Temperature: Usually from -40°C to +85°C.

Additional Features:

Built-in Driver: SSD1309 driver IC simplifies control and interfacing.
Graphics and Text: Capable of displaying both graphics and text with high clarity.
No Backlight Required: OLED emits its own light, so no additional backlighting is necessary.

How to Use:

Connect Power:

- . Attach the VCC pin to your power supply (3.3V or 5V) and the GND pin to ground.

Wire the SPI Interface:

- . Connect the SCK (Serial Clock) pin to the SPI clock pin on your microcontroller.
- . Connect the MOSI (Master Out Slave In) pin to the SPI data pin on your microcontroller.

Setup Control Pins:

- . Connect the RES (Reset) pin to a digital output pin on your microcontroller to handle display resets.
- . Connect the DC (Data/Command) pin to a digital output pin on your microcontroller to switch between data and command modes.
- . Connect the CS (Chip Select) pin to a digital output pin on your microcontroller to select the display for communication.

Initialize the Display:

- . Use appropriate libraries and code to initialize the SSD1309 driver and set up the display parameters.

Display Data:

- . Send commands and data to the display using SPI to show text, graphics, or other information.

Test and Adjust:

- . Verify the display’s functionality by running test patterns or sample code. Make adjustments as needed for proper operation.

The 2.42-inch OLED screen with a 128×64 resolution and SSD1309 driver provides a high-contrast display with vibrant yellow pixels. Its SPI interface and low power consumption make it a versatile choice for various display applications.