1000mAh 7.4V 2S LiPo Battery

Specifications:

Voltage: 7.4V nominal (2S configuration)
Capacity: 1000mAh
Discharge Rate: available in options like 20C, 25C, or higher (check specific model)
Configuration: 2S (two cells in series)
Dimensions: Approximately 70mm x 35mm x 20mm (length x width x height)
Weight: Approximately 100g (may vary slightly depending on design)
Connector Type: JST, XT60, or another compatible connector (check compatibility with your device)

Features:

High Discharge Rate: Capable of supporting high current demands, ensuring sufficient power for fast accelerations and responsive control during operation.
Compact and Lightweight: The battery’s lightweight design makes it suitable for small and medium-sized RC applications without significantly impacting overall weight.
Extended Flight or Run Time: With a capacity of 1000mAh, users can enjoy longer periods of operation before needing to recharge.
Stable Performance: Delivers stable voltage output throughout the discharge cycle, providing consistent power to your device.

Original price was: ৳ 1,300.00.Current price is: ৳ 1,020.00.

Add to wishlist

Specification

Overview

Power Requirements:

Input Voltage: 7.4V nominal with a maximum charge voltage of 8.4V (4.2V per cell).
Discharge Current: Depending on the model, can handle continuous currents up to 20A or more.

Input and Output:

Input: Charge using a compatible LiPo charger specifically designed for 2S batteries.
Output: Supplies power to the device’s motors and electronic components, ensuring efficient operation.

Physical Characteristics:

Form Factor: Rectangular shape, designed to fit in standard battery compartments of RC devices.
Material: Made with durable and lightweight materials, often featuring protective casings to minimize damage during impacts.
Wiring: Comes with a pre-attached connector, making it easy to connect and disconnect from your device.

Additional Features:

Protection Circuitry: Many models include built-in safety features to prevent overcharging, over-discharging, and short circuits, enhancing the battery’s lifespan and safety.
Compatibility: Suitable for a range of RC vehicles, including drones, planes, and cars, depending on power requirements.

How to Use:

Charging:
- Use a compatible LiPo charger designed for 2S batteries.
- Connect the battery to the charger, ensuring the correct settings are applied (set to 1C or lower for safe charging).
- Monitor the charging process and disconnect once the voltage reaches 8.4V.
Installation:
- Locate the battery compartment in your RC device.
- Connect the battery using the appropriate connector type.
- Secure the battery in place using straps or Velcro, if necessary.
Pre-Flight/Run Check:
- Ensure the battery is fully charged and properly connected before use.
- Check for any signs of damage; do not use damaged batteries.
Operation:
- Power on your device and perform a pre-flight or pre-run check.
- Enjoy the extended flight or run time provided by the 1000mAh capacity.
Post-Operation Care:
- After use, allow the battery to cool down before recharging.
- Store at a safe voltage (between 3.7V and 3.85V per cell) if not using immediately.

Applications:

RC Drones: Ideal for powering quadcopters and other UAVs.
RC Cars and Boats: Suitable for high-performance electric vehicles requiring a stable power source.
Hobbyist Projects: Perfect for DIY electronics projects where a lightweight power source is needed.

The 1000mAh 7.4V 2S LiPo Battery is an excellent choice for hobbyists and RC enthusiasts seeking a reliable and efficient power source for their devices. Its lightweight design, high discharge capability, and stable voltage output make it suitable for a variety of applications, providing optimal performance and longer run times.