1-Inch 2-Digit 7-Segment Green Common Cathode Display

Specifications:

Display Type: 7-segment LED display
Digit Count: 2 digits
Digit Size: 1 inch per digit
Color: Green
Connection Type: Common Cathode

Special Features:

Large and Readable Digits: Each digit measures 1 inch, ensuring visibility from a distance.
Green LED Color: Provides a bright and clear display with good contrast.
Common Cathode Design: All the segment cathodes share a common ground connection, simplifying circuit design.

Wiring Connections:

Common Cathode Pin:
- . Connect this pin to the ground (GND). This pin acts as the shared negative terminal for all segments.
Segment Pins (A-G):
- . Connect these pins to the digital output pins of your microcontroller.
- . Use current-limiting resistors between each segment pin and the microcontroller to protect the LEDs.
Decimal Point Pin (if available):
- . Connect this pin to an additional digital output pin if the display includes a decimal point.

Power:

Operating Voltage: 5V.
Current Consumption: About 20mA per segment. The total current draw depends on how many segments are lit simultaneously.

Original price was: ৳ 150.00.Current price is: ৳ 105.00.

Add to wishlist

Specification

Overview

Input and Output:

Input: Digital signals from a microcontroller or similar device, which control which segments light up.
Output: Displays numbers or symbols by lighting up specific segments in each digit.

Physical Characteristics:

Dimensions: Approximately 50mm x 30mm x 15mm (dimensions may vary slightly by manufacturer).
Weight: Compact and lightweight.
Material: Made from plastic with a clear lens for visibility.

Technical Specifications:

Forward Voltage: About 1.8V to 2.2V per segment.
Maximum Current: Approximately 20mA per segment.
Operating Temperature: Usually -20°C to +70°C.
Storage Temperature: -40°C to +85°C.

Additional Features:

Durable Construction: Built for longevity with a strong plastic casing.
Bright Green Display: High-intensity LEDs ensure clear readability.
Versatile Usage: Suitable for applications like digital clocks, counters, and measurement displays.

How to Use:

Connect Power:

- . Attach the common cathode pin to the ground (GND). This powers the display and connects all segments’ negative terminals to the ground.

Wire the Segment Pins:

- . Connect each segment pin (A-G) of both digits to digital output pins on your microcontroller.
- . Include current-limiting resistors in series with each segment pin to prevent damage to the LEDs.

Control the Display:

- . Program your microcontroller to apply a LOW signal (ground) to the segment pins for the digits you want to display.
- . Ensure the correct segments are lit up to form the numbers or symbols.

Test the Display:

- . Check each digit and segment by programming different numbers and verifying the display.
- . Adjust connections and programming as needed to ensure correct operation.

Integrate into Your Project:

- . Place the display in a visible location within your project.
- . Secure all connections and ensure the display functions as intended in your application.

The 1-inch 2-digit 7-segment green common cathode display is ideal for projects where clear, large numeric displays are needed. Its easy wiring and bright green LEDs make it a practical choice for various electronic applications.